DataPhysics – HGC – Humidity generator and controller

KOREA

Euisung Hwang, Assistant General Manager, Technical Sales

DKSH Korea Ltd.
3rd Floor, Zen building, 152 Dogok-ro, Gangnam-gu
06261 Seoul
Korea

+82 2 2192 9755

+82 2 2192 9755

Email

With the humidity generators and controllers of the HGC series the relative humidity can be controlled inside of small measuring chambers. Hence, the influence of humidity on interfacial parameters can be investigated in combination with another measuring device from DataPhysics Instruments.

Humidity is an important parameter for many different material analysis systems. Since the humidity generators and controllers of the HGC series can work stand-alone and are available as OEM products, they can be used for many laboratory applications and devices. For example Verpaalen et al. were able to investigate a bioinspired bilayer actuator that changes its bending angle depending on temperature and humidity using a HGC 30.

Key Features

Humidity Generator and Controller

Control and generation of relative humidity in the range of 5% to 90%
Stand alone generation of dry air without an external pressurized gas supply
Heated water reservoir
Heated connection gas tube (transfer line) to thermal chamber to avoid condensation
Flow rate: 70 … 600 ml/min with ambient air or 70 … 3500 ml/min with external gas supply
Easy control via touch-screen or software
Serial RS 485 or USB interface
Calculation of dew point in the measuring chamber
Automated drying and regeneration of desiccant by a built-in heating system in two alternatively used desiccant reservoirs (total stored desiccant amount about 1.0 kg)
Inlet for external gas supply of pressurised air, nitrogen or argon (only clean and oil free gases)
Integrated flow rate and pressure regulator calibrated for N2 and Ar